The traditional manual graphite spraying method has the problems of uneven spraying, slow efficiency and unsafe spraying, which will affect product quality, dies working life, safety of operator. The automatic spray graphite machine can replace the workers' hand gun. In actual production, on the basis of not adding extra power source, it can spray graphite effectively and evenly inside the thickening mold, and make the forging process lubricative. Reduce forging defective rate effectively, amount of graphite usage and environmental pollution, so as to improve product qualification rate, extend dies working life and reduce production cost.
Spray graphite machine can be used with hot die forging press or electric screw press, employing single position, double positions or three positions, the rotating mechanism using two parallel rotation design.The spray graphite machine has the function of blowing scale and ejecting mould agent.The horizontal drive of spray graphite machine is driven by servo motor, and it has height adjustment function.
Spray graphite machine can be used for manual,automatic and semi-automatic production line to solve the problem of uneven ink spraying and uncontrollable ink quantity, too much ink on the die will make the liquid flow to hang. The process of spraying is to blow compressed air firstly, then spray graphite evenly, and finally blow compressed air to blow away the excess graphite.
There are many forms of spray graphite machine, sprinkler head can do circular track movement or according to the shape of forging track.
Mobile telescopic graphite spray device
Mould fixed graphite spraying device
2.Automatic Spray Graphite Machine Advantages
1). Stable and accurate servo system control;
2). Replace manual operation to save labor cost;
3). Jet or graphite can be set up freely, working time can be adjusted;
4). The position of spraying is adjustable and easy to operate;
5). It can be customized according to customer site.
3.Automatic Spray Graphite Machine Main Structure
1). Spray mechanism
●High reliability industrial nozzle; flow of graphite liquid can be adjusted to produce ideal spray without changing the air and liquid pressure.
●Built-in valve can prevent dripping at the end effectively; Nozzle parts are interchangeable and easy to disassemble and assemble.
●Each station is equipped with two nozzles, and responsible for spraying upper and lower dies.
2). Rotary device
●Adopt two-point parallel rotation design;
●Pneumatic motor drive;
●By adjusting the air pressure of reliable air pressure valve, it’s can be convenient to adjust the speed of rotation;
●It’s easy to adjust the adjustable rotation radius.
●At the end of each rotation, it can stop in fixed position;
●With counterweight block, stable rotation and uniform speed.
3). Horizontal drive
●Double guide rail design on the top and bottom;
●Upper silver linear guide rail;
●Silver guide screw;
●Servo motor drive, fast speed, high accuracy, convenient stroke setting;
●The guide screw is equipped with lubrication device.
Speaking of the air hammer, everyone must be familiar with it. It is a kind of free forging equipment. When the air hammer is working, the compressed gas in the compression cylinder enters the workin......
When we decide to buy a screw press, we must first understand the relevant types of electric screw presses, and then we need to determine the model of the direct drive electric screw press? After th......
Anyang Forging Press Company was established in 1956. Over the past 60 years since the establishment of the enterprise, Anyang Forging Press's people have continued to climb the peak of forging techn......
Full hydraulic closed die forging hammer
Full hydraulic die forging hammer refers to a die forging hammer whose strike and return stroke of the hammerhead are hydraulically driven. It has the advantag......
Fully Hydraulic Open Die Forging Hammer refers to the free forging hammer whose strike and return stroke of the hammerhead are hydraulically driven. It is a new type of forging equipment that is energ......
With the rapid development of science and technology, competition has become more and more fierce. In order to improve the competitiveness of products, many enterprises are carrying out automatic prod......
The appearance of die sticking in the forging process has a great influence on the output of the forging line and the smoothness of the whole line. In addition, if the sticking time is too long or the......
On the second day of the exhibition, the heat in front of Anyang Forging Press Booth was still unabated. Various forging equipment developed by our company scrolling on the screen attracted a large ......
On July 27, 2021, China International Metalforming Exhibition opened in Shanghai National Convention and Exhibition Center. As a leading enterprise in the forging industry, Anyang Forging Press appe......
After nearly half a year of preparations, with the joint efforts of all employees of Anyang Forging Press Company, on June 25, 2021, Intelligent Precision Forging Technology Experience Exchange an......
SEND INQUIRY
24*7 Service
If you want to learn more about forging machine, steel ball machine, briquette press or hydraulic riveter etc products, please send requirements to info@anyanghammer.com